Friday, September 9, 2011

Shop Class 101

Obviously, Zach and I LOVE to cook. Though we don't have a fancy kitchen, we find it mostly usable. What isn't working for us, however, is our lack of counter space. Since our dish drying rack takes up 1 out of 3 countertop spaces, it leaves us only about 4 square feet to spread out our computer (to refer to a recipe), cooking supplies, ingredients, appliances, and our glasses of wine. Drinking while making dinner is the best part! It hasn't been too much of an issue, but it would be nice to have more space. 

I have been looking for a long table to put underneath this window, but haven't been able to find anything long enough, and deep enough, or at countertop height. So...


I decided to build something! I haven't even taken so much of a shop class (2 semesters of home economics - at least I can sew!), but thought Zach and I could handle it. There is a website called http://ana-white.com/, and this blogger posts plans for building things out of wood. I found a plan for a table on here, and knew it would be perfect for that big space under the window. The plans for the table needed tweaking since we wanted it longer, and deeper, so we played around with the measurements, until we made a whole table to fit that space (when you take out the shelf the microwave is on). We also added a bottom shelf. I forget the height (but it's at countertop), but it is 2 feet deep and 5 feet long. See? That's a whole lotta square footage we were missing out on! 

Next, I went to Home Depot, and bought the (cheapest) lumber, a drill, screws, a sander, and sandpaper. For the lumber, we got 2x2s. Fun story about 2x2s. They aren't 2 inches by 2 inches. It's 1.5  by 1.5. That seems silly to me to call it a 2x2. They should just make actual 2x2s. I am gonna make a call to Home Depot... get that changed... Anyway, when I got home, Zach cut the 2x2s according to the plan with a hand saw. I think in all, he cut 18 pieces of wood. 

Next, we made the frame. On the left are the 2 tops (top and bottom shelf), and on the right is the side of the table. 


Then we put it all together! Don't be deceived by the pictures. This took a lot of time to accomplish. There was a lot of drilling, leveling, arguing, un-drilling, re-drilling, arguing, leveling, and more. I couldn't decide who wasn't level - the table, the floor, or our heads! By the end, the frame wasn't level in all the places, but I decided it didn't matter because I was excited for the next part of the project. Also, since we cut the 2x2s by hand, there wasn't any way to guarantee a 90 degree cut every time.


Outside the table went for installation of the plywood and sanding. I got the plywood cut at Home Depot, so it was pretty easy to screw the 2 pieces into place. Then we put wood filler into the drill holes.

Unfortunately, we don't have pictures of the sanding, staining, and more staining, and polyurethane-ing, and sanding, and polyurethane-ing, and sanding, and polyurethane-ing, and sanding, and a little more polyurethane-ing and sanding. This whole process took several days since we had to wait for our coats to dry, but it was so worth it.


And here it is!


It fills up that space perfectly, and gives us so much more counter space to work on! The shelf below is also wonderful so we can put our cookbooks on it, and baskets full of junk. The table is mostly level. You certainly cannot tell it's not level while using it, so it's just fine. Check out the cool paper towel rack we made out of scrap wood!


I am pretty impressed with ourselves that we managed to make this table. It took a lot of internet researching, calls to my dad (who knew stain and polyurethane could be so confusing?!), and re-doing things, but it was totally worth it. It's pretty great. Even though we are in this rental for another year, we hope to get a lot of use out of it. We haven't made a big meal yet (it's been in the house for 2 days now), but I know it's gonna be wonderful! Cool, huh?!

1 comment:

  1. You guys are so resourceful. I love the baskets and paper towel holder additions.

    ReplyDelete